What is the optimal orientation and tilt angle for solar panels ?

To best optimize the production of solar panels, do not underestimate the importance of their orientation and inclination! However, it’s not always about producing a maximum amount of energy; you also need to take into consideration your consumption needs.

For instance, if you are self-consuming your electricity rather than selling it back to the grid, the optimal orientation is not necessarily the same!

The tilt of the panels is important because your panels will produce a maximum of energy when the sun is directly perpendicular to them. During the winter in the northern hemisphere, for example, the sun is low in relation to the horizon. In this case, for the solar panels to get their best performance, a steep angle of 60° is best.

During the spring the best angle is 45°, and during the summer when the sun is high in the sky, it’s best to have a low tilt at 20°!

The aim is to produce more heat in the winter and less heat in the summer.  Example: In Marseille, for conventional thermal energy, 4m² of panels are necessary for a typical home’s hot water needs (200 L at 45 ° C) and the best inclination of the panels is between 50° and 55°.

This inclination does not correspond to maximum sunshine, but because there is a surplus of production in the summer, it is better to optimize the angle for the winter.

For photovoltaic panels where the electricity is re-injected into the grid for re-sale , the optimum orientation is south with an angle of a 37°, which maximizes total electricity production.

With the DualSun PV- T panels, which produce both electricity and hot water, the optimal angle is the same as for PV panels.

Example: For a DualSun installation in Marseille, we recommend a 4-panel design for a family of 4. The best angle for that is maximum sunshine (37 °).

Solar panels installed vertically produce less energy, but a façade installation can still make sense depending on the specific needs and constraints of the building. For example, the Arpont shelter has DualSun panels installed vertically. This was a design choice, but also a technical decision to avoid an accumulation of snow during the winter.

You can see on the graph above the variation of sunlight according to the orientation and tilt on a given surface. Note that the slope is important, but the orientation is essential as well!

In the case of PV-T, when a roof has a fixed slope, it is not necessary to change the angle of the roof to get an optimal production. In fact, the production of energy will always be interesting (which is not necessarily true with thermal solar panels for heating).

The orientation of the panels is important to capture a maximum of sunlight and therefore produce a maximum of energy.

South-facing roofs receive the most sunlight, and therefore the most solar energy during the day.

If you refer to the diagram above, you will see that further you are from the south, the more your production will be affected.

In the case of “self-consumption” for the PV production, it can make sense to orient the panels east/west rather than south-facing. East-facing panels will produce more energy in the morning, west-facing more energy in the late-afternoon. With respect to energy autonomy, the goal is not to produce the maximum but what is needed.

This is, for example, the case for the off-grid Arpont chalet in the French Alps, where the DualSun panels are oriented east/west to be able to produce more energy in the morning and the evening and less during the day, when the shelter is pretty empty!